Product Details

SR002 Series

7 Amps to 150 VDC Separates

  • SR002 type separate slip ring & brush block sets were designed primarily for low voltage, signal carrying applications making them ideal for use in test rigs or production equipment.

    Request More Info Installation Guide
  • Electrical Specs

    • Slip ring available with 4, 6, 8, 12, 18 or 24 rings standard.
    • Current: Signal level to 7 Amps per ring standard.
    • Voltage: up to 150 VDC standard.
    • Insulation Resistance: >200MΩ at 500 VDC.
    • Hipot: 500 VAC for 15 seconds (all combinations).
    • Electrical Noise: Less than 10 mΩ peak at 5 rpm.
  • Modifications

    • Different numbers of rings to those shown.
    • Slip ring can be bored/sleeved to suit shaft diameter.
    • Increased barrier heights for applications to 240 VAC.
    • Termination type & length to customer requirements.
    • Silver connections to minimise thermal errors.
    • Alternative contact materials for specific applications.
7 Amps to 150 VDC Separates
Enlarge Image

Variations

Part # Rings A Length B Length
Part # 31051-0204-000 Rings 4 A Length 1.25 ±.02 B Length 1.00 ±.02 Download Drawing
Part # 31051-0206-000 Rings 6 A Length 1.63 ±.02 B Length 1.38 ±.02 Download Drawing
Part # 31051-0208-000 Rings 8 A Length 2.00 ±.02 B Length 1.75 ±.02 Download Drawing
Part # 31051-0212-000 Rings 12 A Length 2.75 ±.02 B Length 2.50 ±.02 Download Drawing
Part # 31051-0218-000 Rings 18 A Length 3.88 ±.02 B Length 3.63 ±.02 Download Drawing
Part # 31051-0224-000 Rings 24 A Length 4.99 ±.02 B Length 4.74 ±.02 Download Drawing