SR011 Series

7 Amps to 250 VDC Sealed

  • The SR011 series slip ring offers sealing to IP65 standard for the SR003 type packaged slip ring. These sealed slip rings can be built using the standard components of the SR003 type unit with a very minimum lead time required.

    Request More Info
  • Electrical Specs

    • Slip ring available with 4, 8, 12, 18, 24, 30 & 36 rings standard.
    • Current: Signal level to 7 Amps per ring standard.
    • Voltage: up to 250 VDC standard.
    • Insulation Resistance: >200MΩ at 500 VDC.
    • Hipot: 500 VAC for 15 seconds (all combinations).
    • Electrical Noise: Better than 10 mΩ - speed dependent.
  • Modifications

    • Different numbers of rings to those shown.
    • Changes to drive/mounting to customer requirements.
    • Higher current & voltage capacity per ring.
    • Higher IP ratings available.
    • Termination type & length to customer requirements.
    • Alternative contact materials for specific applications.
7 Amps to 250 VDC Sealed
Enlarge Image

Variations

Part #RingsA Length
Part #30061-1104-000Rings4A Length3.43 ±.02Request Drawing
Part #30061-1108-000Rings8A Length4.17 ±.02Request Drawing
Part #30061-1112-000Rings12A Length4.92 ±.02Request Drawing
Part #30061-1118-000Rings18A Length6.045 ±.02Request Drawing
Part #30061-1124-000Rings24A Length7.17 ±.02Request Drawing
Part #30061-1130-000Rings30A Length8.29 ±.02Request Drawing
Part #30061-1136-000Rings36A Length9.41 ±.02Request Drawing