SR008 Series

3 Amps to 210 VDC Packaged

  • SR008 type packaged slip rings were designed primarily for low voltage, signal applications being run at low to medium speeds. The assembly has a small through bore for concentric shaft mounting or for the passage of fluid or gas lines.

    Request More Info Installation Guide
  • Electrical Specs

    • Slip ring available with 4, 8, 12, 18 & 24 rings standard.
    • Current: Signal level to 3 Amps per ring standard.
    • Voltage: up to 210 VDC standard.
    • Insulation Resistance: >200MΩ at 500 VDC.
    • Hipot: 500 VAC for 15 seconds (all combinations).
    • Electrical Noise: Better than 10 mΩ - speed dependent.
  • Modifications

    • Different numbers of rings to those shown.
    • Changes of shaft mounting to customer requirements.
    • Higher current & voltage capacity per ring.
    • Internally modified to customer requirements.
    • Termination type & length to customer requirements.
3 Amps to 210 VDC Packaged
Enlarge Image

Variations

Part #RingsA Length
Part #30050-0804-000Rings4A Length1.70 ±.03Request Drawing
Part #30050-0808-000Rings8A Length1.70 ±.03Request Drawing
Part #30050-0812-000Rings12A Length2.26 ±.03Request Drawing
Part #30050-0818-000Rings18A Length2.82 ±.03Request Drawing
Part #30050-0824-000Rings24A Length2.82 ±.03Request Drawing