SR007 Series

10 Amps to 150 VDC Separates

  • SR007 type slip rings are also an extension of the smaller SR001 & SR002 type separate slip ring & brush block sets. Designed for low voltage, signal and low power applications makes them ideal for use in a variety of projects.

    Request More Info Installation Guide
  • Electrical Specs

    • Slip ring available with 4, 6, 8, 12, 18, & 24 rings standard.
    • Current: Signal level to 10 Amps per ring standard.
    • Voltage: up to 150 VDC standard.
    • Insulation Resistance: >200MΩ at 500 VDC.
    • Hipot: 500 VAC for 15 seconds (all combinations).
    • Electrical Noise: Less than 10 mΩ peak at 5 rpm.
  • Modifications

    • Different numbers of rings to those shown.
    • Slip ring can be bored/sleeved to suit shaft diameter.
    • Increased barrier heights for applications to 240 VAC.
    • Termination type & length to customer requirements.
    • Silver connections to minimize thermal errors.
    • Alternative contact materials for specific applications.
10 Amps to 150 VDC Separates
Enlarge Image

Variations

Part #Rings A LengthB Length
Part #31051-0704-000Rings4 A Length1.58 ±.02B Length1.34 ±.02Download Drawing
Part #31051-0706-000Rings6 A Length2.05 ±.02B Length1.81 ±.02Download Drawing
Part #31051-0708-000Rings8 A Length2.52 ±.02B Length2.28 ±.02Download Drawing
Part #31051-0712-000Rings12 A Length3.46 ±.02B Length3.23 ±.02Download Drawing
Part #31051-0718-000Rings18 A Length4.88 ±.02B Length4.64 ±.02Download Drawing
Part #31051-0724-000Rings24 A Length6.30 ±.02B Length6.06 ±.02Download Drawing